Tips on How to Mount a Monitor to the Wall
During use, computer monitors are commonly placed either on a desk or on a table. However, some conditions might force you to mount your computer to the wall. Mounting your personal computer is a procedure that most people are not familiar with. It is a simple task to mount your monitor to the wall especially if it is a liquid crystal type. An hour is enough to install your monitor to the wall and have it functioning after purchasing a mount. It is a brilliant idea to have mounted PCs in institutions of higher learning as they prefer the use of computer projection. The good air circulation in the place where you have mounted your PC will help prevent it from overheating. A wall mounted PC can be made of base materials such as; wood, steel or plastic.
To mount your personal computer to the wall, you need to read this article as it explains the procedure and tips that you should follow. It is a requirement for a wall mounted PC that you first choose base materials by determining their weight, size and ability to be mounted. The exact place on the wall where you are going to mount your monitor is the first thing to consider. To be able to connect to the monitor effectively, ensure that you place the monitor at a place that is closer to the CPU and that it is accessible to other cables. You have to determine that the mounting holes at the back of your monitor fit properly. If you find out that it does not fit accordingly, make sure you buy an adapter plate. However, if the monitor fits properly, it is ready for installation and you can continue to the next step.
The next step involves using a stud finder to ensure that you install the mount into the stud. If you find it difficult to get the needed stud, you can purchase a hardware kit but these will cost you more. After locating the studs, you have to mark the location where you are going to make the first hole. For a good installation of your monitor, make the first hole on the top left. Someone is needed to help you hold the mount and level it using the reference hole drilled on the top left.
Ensure that the mount is in level and mark the other three holes on the wall. On the wall, drill holes on the points where you had marked. After drilling the holes you can screw the monitor into the mount. The next step involves connecting your monitor to the VGA and power cords. Determining whether everything is working out by testing the monitor is the last step. You will be able to mount your monitor by following these guidelines.